Payment & Shipping Terms:
Deep Sea Electronics PLC The Model DSE5110 is an Automatic Engine Control Module which has been
designed to allow the OEM to meet demand for increased?
Capability within the industry.The module has been designed to automatically start and stop the
engine,indicating the operational status and fault conditions,shutting down the engine and indicating the
engine failure by means of a graphical LCD display and a flashing LED on the front panel. Selected
operational timers and alarms can be adjusted by the customer.
Configuration of the module can be carried out manually utilising the front panel editor, or alternatively by
PC,using the 5110 software.Operation of the module is via pushbuttons mounted on the front panel with
STOP, AUTO and MANUAL modes.
A further pushbutton provides an LCD DISPLAY SCROLL function to view the instrumentation.The module
features microprocessor control and provides a comprehensive list of timers and pre-configured equences.
This allows most required specifications to be achieved.The DSE5110 series modules have been designed
for front panel mounting. The module is fitted into the cut-out with the fixing clips removed.These are then
fitted from the rear.
Connection is via locking plug and socket connectors. The 5110 module provides engine and electrical
metering facilities via the LCD display with the following instrumentation displays, accessed via the SCROLL
Lubricants to protect lower
Charger fail rechargeable
Emergency generating units down
Generating units of public alarm
Generator over-voltage under-voltage over-current protection
High cooling water temperature protection
Engine overspeed protection
Failure of the engine shutdown
Start the engine failure
Dimensions: 240mm x 172mm x 57mm Panel Cutout: 220mm x 160mm ( 8.7” x 6.3”)